Elinchrom Ranger Plus Pocket Wizard Equals Insanity

A few weeks ago the idea popped into my head to buy a battery powered strobe. This wasn’t the first time I thought about buying one. I’d looked into portable strobes on several previous occasions but could never justify the expense. I’d rented some Profoto 600Rs for a couple shoots that left me cursing mid-way through a shoot when I ran out of power. In this case I knew I had a job coming up that would require a battery powered set-up. I’d need enough power to at least keep up with bright sunlight. I could spend $400 renting a package for the one shoot or I could invest in my own.  I opted for the 1100 watt/second Elinchrom Ranger RX with the S head and the PocketWizard ST4 transceiver to pair with my TT5s.

With the  PocketWizard ST4 I’d be able to sych my camera faster than 1/250th of a second which would help in bright sun. I spent a couple days making sure I was buying the right Ranger and flash head. I came across a lot of articles that referenced this set-up using Nikon bodies and I also came across a couple mentions that photographers hadn’t been able to match the fast synch speeds with Canon bodies. I figured that with a couple stops plus 1100W/s I’d be fine.

As soon as I got the system I fired it up and tested it out. I was looking for synch speeds over 1/1000 sec. I was a bit disappointed when it was clipping at 1/640. Instead of messing with the TT5s settings I upgraded the firmware on my TT5s and the new ST4. Immediately after my upgrade I was synching at 1/8000.  This past monday I finally had a chance to test the system during a real shoot. I am pleased to report that it was everything I had expected and more.

When I get new equipment I go out and test. I need to use it, learn about it and know what it’s capable of. When I show up on set for a job I better damn well know how to use my gear and learning on someone else’s dime is a recipe for disaster.

A few years ago during a swimsuit shoot with Kelley we started talking about her dance skills and I mentioned not being able to capture a graceful jump shot with a dancer up to that point. After a few warmups she was pulling this type of jump off with little effort. I managed to capture this shot at 9 in the morning with the help of a big reflector and a couple small Canon speedlights.  After the shoot we vowed to shoot again.  When I got the Elinchrom she was my first call.

Kelley Koski March 2010

Kelley Koski March 2010 – F10 1/500

Unlike our fist shoot, this wasn’t about great morning light and beautiful swimsuit shots. This was about her dance ability and grace. We scheduled the shoot for 3:30 PM. I figured it would be bright but the sun would be over her shoulder and bearable. My goal with the Elinchrom was to fill in the light from the front while maintaining the blue sky.

I opted to use the lower powered flash socket which only puts out 366 watts/second. I was able to shoot as much as she could jump without having to worry about recycle times. Since this was my first test with the pack I didn’t know how much I could push it. I didn’t want to be caught holding the bag after running out of power half way through the shoot. The following shot is unedited and shown as-shot in camera.

F4.5 1/2500 - Shown as-taken and unedited

F4.5 1/2500 – Shown as-shot and unedited

We ran though a couple outfit changes and once we got to the last set I figured I could up the power and not worry about running out of steam. The Ranger has a power indicator, but out in the bright sun it was hard to read and I didn’t know if I could trust it. I switched to the full-powered socket and upped the power.  I knew I wanted to try to overpower the sun but wasn’t sure how successful it would be. The image speaks for itself.

F22 1/1000 - Shown as-shot and unedited

F22 1/1000 – Shown as-shot and unedited

Part II

Turns out I had power to spare.

I had a second shoot scheduled the following day with Ryan Marks. We would be trying to capture the same type of image; although his shoot was scheduled for 11AM. I wanted to see how much power was left in the pack so I didn’t charge the battery before Ryan’s shoot. I figured I could swap out the battery if I needed, but once again I wanted to see what the pack would do.

Since the sun was mostly overhead for Ryan’s shoot it was a different look. I needed the light mostly for fill. Once we had some great shots I pushed the pack and overpowered the sun. I made it through the shoot and still had some power left.

Ryan Marks - F13 1/2500 - Shown As-shot and Unedited

Ryan Marks – F13 1/2500 – Shown As-shot, unedited, at 12 noon

I’ve come home from both shoots overjoyed at the results of the photos and the Ranger. More test shoots are scheduled.

A couple footnotes. I ordered an Elinchrom EL 19374 Ranger Adapter to connect the ST4 and Ranger. Turns out one is included in the package. I couldn’t get my Sekonic Light Meter to trigger the ST4. In fact I couldn’t trigger the St4 with my Plus IIs either. I was able to trigger it with another TT5.  I would have LOVED to use my new 5D, but the TT5s would not synch higher than 1/200 with my 5D Mark III. Pocket Wizard hasn’t updated the firmware yet since the Mark III is so new and in high demand.

** David from PocketWizard cleared something up for me. The ST4s default is to receive info via their “Control TL” signal and not the standard pocket wizard channel. This can be changed using the utility which would enable triggering the ST4 via my Sekonic and/or the Plus II. They also expect to have their hands on a 5D Mark III this week and start working on a firmware upgrade.

Share

15 Responses to “Elinchrom Ranger Plus Pocket Wizard Equals Insanity”

  • [...] I mentioned on my post about the Elinchrom Ranger, when I get new equipment I take it out and test with it. Up until my shoot with Kiana I had only [...]

  • [...] Chuck Espinoza has posted about two recent shoots he did with Kelley Koski and Ryan Marks. This blog entry chronicles Espinoza’s desire to [...]

  • Hi just to confirm. With the pocket wizard setup you are able to get a sync speed of 1/8000 with a ranger rx battery pack and a “s” head? Thank you

  • Yep, with my S head, pocket wizard TT5 and ST4 I am able to synch at 1/8000

  • Connor Katz:

    Is the longer flash duration of the S head an advantage here? Just wondering if you could achieve the same thing with an A head?

  • Connor,
    From the (exhaustive) research I did before I bought the Elinchrom and ST4 your comment is correct. The short flash duration of the A head didn’t allow for the ST4 and “fake” high speed synch to work.

  • Connor Katz:

    How twisted is that! If you bought an A head to stop motion better, and Hypersync works better with a slower flash duration. Glad I havent bought anything yet!

    I wonder if anyone has done any comparisons between an ultra high speed flash like an Einstein and a Quadra or RX using Hypersync? I would imagine a fast shutterspeed would trump a fast flash duration as the ambient has to effect the image at least a little bit. Also would the Einstein have enough power at lower settings to get a fast flash duration to overpower the sun?

    Its too damn expensive to test these things on your own!! :)

  • Connor I think I just got an email from elinchrom that this month you could try their products for free. (March 2013). So if you have a rental house or retail store close thr sells elinchrom I think you can try em out. Free. The quadra is significantly smaller and has less power. That has some plusesif you are worried about weight. I wanted to be able to use the Ranger w pocket wizard’s HSS to balance if not over power the sun. It was $2000 well spent.

    I didn’t look into the Paul Buff systems at all.

  • Great post, thanks for the useful info.

    Turns out bought my Ranger with the A head before any of this was possible. I Shoot BMX and MX and I would love the HSS. Has anyone tried this with the A head? I know the results wouldn’t be the same, but maybe getting to 1/500 or 1/800 would be awesome.

    I still get good results shooting at 1/250, but this is totally different.

    Thanks!

  • I don’t have experience with the Ranger A heads. I imagine if you had two Pocket Wizard TT5s or similar you could probably get 1/500. Email the guys at pocket wizard. They were great in answering questions and explaining things hen I bought the ST4

  • Hey Chuck, Great article, I’m right now looking at getting the same setup, and my exaustive research is finally complete except for one thing…symmetrical or asymmetrical power pack. I’m a bit new to the power pack lighting system so I’m curious what you prefer and why!

  • Dylan,
    My plans for this pack was always to use it on location with one head. The symmetrical vs. asymmetrical never came to mind. My thoughts lean towards asymmetrical because If I use two heads on my norman packs I tend to use one for a key light and the other as fill or an accent and lower power.

  • Can you help clear something up for me please. The shots of the people dancing above – what are your camera settings, for example the F-Stop and shutter speed. If I am understanding correctly the maximum shutter speed of my Canon 5D mark iii is 200th of a second, and so I leave it on this speed and it is the flash duration we are talking about above of 1/8000th of a second? Or are we able to change the shutter speed of the camera to 1/8000 of a second and the flash duration will fill in?
    I tried a shot this weekend using my pocket wizards with the recent beta firmware upgrade that allows syncing to 1/8000 when used with my 5D and Elinchrom Quadra Rangers but will I turn up the speed to 250 on the camera I was getting a black bar appearing and when I turned the F-Stop down to it’s max of f/22 I got a great shot but the background was still light.
    Would love some technical info on your setting up please.

    Dominic

  • Dominic,

    The camera settings and speeds are listed under each respective photo. They were anywhere from 1/500 to 1/2500 with my 5DM3. Even though our max sync is 1/200 with HSS we can cheat this and sync higher. If your camera is not allowing you to change the speed past 1/200 something is wrong with your on-camera TT5 or mini.

    Do you have a pocket wizard ST4 or similar on your quadra? You may want to look into what type of head you have on the quadra. There are S heads for the ranger (S for sport) that have a flash duration that’s too short for this to work as well as with my A head.

    The black bar is an indication that the communication between your 5d pocket wizard and the PW on the quadra aren’t in sync. You can adjust this using the PW utility.

    This may help: http://www.pocketwizard.com/inspirations/tutorials/hypersync_tutorial_video/

  • Is it possible for someone to post their pocket wizard utility setting on here when shooting with a Mark III and the Rangers? Please

Leave a Reply